User manual

iLM8 User Manual

I/O Menu

I/O Menu Screen Display

The I/O Menu will allow you to tailor iLM8 to suit your specific application.

Audio Input: Navigates to the audio input configuration sub-menu.

Clock Source: Defines where iLM8 gets the timing signal to sync its internal clock.

a. Internal: iLM8’s internal clock. Define using Sync Source.

b. 1/2: iLM8 will get timing from the 1/2 BNC Input. (Default)

c. 3/4: iLM8 will get timing from the 3/4 BNC Input.

d. 5/6: iLM8 will get timing from the 5/6 BNC Input.

e. AUX: iLM8 will get timing from the AUX BNC Input.

Sample Rate: If Clock Source is set to internal, defines what sample rate frequency iLM8 will use.

(32.0, 44.1, 48.0, 88.2 or 96.0 kHz)

Audio Input Menu

Audio Input Menu Screen Display

NOTE: Unless your iLM8 has the factory-installed HD/SDI I/O or Balanced Digital AES I/O modules

installed, your screen will differ from that above.

Audio Source: Determines which set of physical inputs iLM8 will use to receive audio. Only the

installed options will be available; only one input type may be used at a time:

• AES Inputs: Audio input is from the BNC AES input jacks. (Default)

• HD/SDI Inputs 1-8: Audio input is from the HD/SDI input jack, embedded audio channels 1-8.