User manual

iLM8 User Manual

• HD/SDI Inputs 9-16: Audio input is from the HD/SDI input jack, embedded audio channels 9-16.

• Balanced Digital: Audio input is from the Balanced Digital DB-25 I/O port.

HD/SDI Mapping: Enters the HD/SDI mapping sub-menu to assign a custom channel configuration.

Will only be present if the HD/SDI I/O module is installed.

HD/SDI Mapping Menu

HD/SDI Mapping Menu Screen Display

For iLM8 to make precise loudness measurements, the audio channel assignments need to be properly

maintained. If your HD/SDI audio channels are embedded in a non-linear assignment, iLM8 will need to

be configured with the correct channel mappings.

Select the input channel pair to be modified and press ENTER. Scroll the rotary encoder to the desired

HD/SDI channel pair and press ENTER to confirm. Repeat for the other channel pairs, as needed.

Network Menu

Network Menu Screen Display

All of the iLM8 network settings are password protected. The password to change the network settings

is ilm8@123. Please take note when entering the password that the iLM8 password is case sensitive.

iLM8 is configured to take a DHCP address by default.

Device Name: Allows you to change iLM8’s name as reported to DNS. Press ENTER while the cursor

is over this field to go into data entry mode. Turn the rotary encoder to scroll through the available

choices of letters (A-Z, 0-9 and _ (underscore)) and press ENTER to move on to the next field. Turning