User manual

30
iLM8 User Manual
5.1 Unit Loudness measure that is used for the 5.1 (surround) inputs.
5.1 Target Target value set for the 5.1 inputs.
5.1 MM Mix Monitor status for the 5.1 inputs.
5.1 Short (Avg.) Short combined average for the 5.1 inputs.
5.1 Inf. Avg. Combined infinite average of the 5.1 inputs.
5.1 Peak Combined peak value of the 5.1 inputs.
5.1 L Short Avg. Short average of the Left 5.1 input.
5.1 R Short Avg. Short average of the Right 5.1 input.
5.1 C Short Avg. Short average of the Center 5.1 input.
5.1 LFE Short (Avg). Short average of the LFE 5.1 input.
5.1 Ls Short Avg. Short average of the Left Surround 5.1 input.
5.1 Rs Short Avg. Short average of the Right Surround 5.1 input.
AUX Unit Loudness measure that is used for the AUX (stereo) inputs.
AUX Target Target value set for the AUX inputs.
AUX MM Mix Monitor status for the AUX inputs.
AUX Short Avg. Short combined average for the AUX inputs.
AUX Inf. Avg. Combined infinite average of the AUX inputs.
AUX Peak Combined peak value of the AUX inputs.
Aux-L Short Avg. Short average of the AUX Left input.
Aux-R Short Avg. Short average of the AUX Right input.
Device Faults Any faults reported by the unit. Refer to the error code table.
Data-logging Field Legend
0
No Faults
1:x AES Lock Error
2:x CRC Error
3:x Validity Error
4:x Bi-Phase Error
5:x No Parity Error
6 No Clock Error
7 DSP Over utilized
Error Codes
After the appropriate options have been set, press the APPLY button to save those settings and begin
communications with the iLM8. The program icon should change from red to green after communication
has been established with the unit, and the iLM8 unit will illuminate the LOGGING LED. Switch back to
the Surround tab to view the program in operation. If a setting has been changed in error, press
CANCEL to revert all settings to their previously saved state.
Channel Code (for X)
1 Left / Right
2 Center / LFE
3 L Sur / R Sur
4 Aux-L / Aux-R