Instruction Manual

M2 User Manual

Push “SELECT” switch to save and increment the menu to the next alarm function.

Alarm Output 4 – RBDS Data Loss (alarm based on data appearing in Radio Text field; available

in M2.2R model only)

Alarm Output 5 – HD Radio

PAD Loss (alarm based on data appearing song title field only,

does not mean data is valid)

• Highlight desired “SET” or “OFF” option using UP and DN switches to toggle the

setting. Select “SET” to set this monitor alarm and continue with alarm configuration

menu; select “OFF” to set this monitor alarm function to off. Push “SELECT” to

continue.

P A D D A T A L O S S

> S E T < O F F

• If “SET” is selected, submenu for “Alarm Delay” with “30”, “60”, “120” and “240”

second options is displayed next. Use UP and DN switches to toggle the setting and

highlight the desired option.

A L A R M D E L A Y

3 0 > 6 0 < 1 2 0 2 4 0 S

Push “SELECT” switch to save and increment the menu to the next alarm function.

Alarm Output 6 – User Assignable

Note – Alarm Output 6 can be configured for one of two HD Radio

parameters, MC Available

Loss or Delay Bit Loss. MC Available Loss triggers whenever the multicast available bit is no

longer active, meaning that there was at least one multicast program being broadcast. If two

multicast programs are being broadcast and one is interrupted, the MC Available Loss alarm will

not activate because of the remaining multicast program. MC Available Loss is an option only in

FM.

• Highlight desired MC Available - “MC-AV”, Delay Bit – “DLAY” or “OFF” option

using UP and DN switches to toggle the setting. Select desired function to be

alarmed and continue with alarm configuration menu; select “OFF” to set this monitor

alarm function to off.