Owner manual

15. Install the Daystar lift spacers into the stock isolator mount-
ing position and install the mounting nuts. ( 3 per side ).
16. Assemble the bushings, sleeves, and shock boots for the
front shocks. Position the coil spring and shock absorber in
the upper spring mount and shock mount.
Installation steps
1. Place the vehicle in Park and set the parking brake. Block the rear
tires.
2. Raise the front of the vehicle and place jack stands under the frame
allowing the front suspension to be lowered. Leave a jack under the
axle.
3. Remove the front wheels.
4. Disconnect the upper sway bar link mount at the axle.
5.
Push the sway bar up and out of the way.