User Guide

GB-42
Trouble Shooting Guide
Symptom
No power
No picture/sound
Interference or
scrolling
Black & White
picture
The player does not
start playback
Correction
• Check if the AC adapter of power plug is
connected securely.
• If powered with the battery, check if it is
exhausted.
• Make sure it's set to correct mode, INPUT or
OUTPUT. INPUTis for signal in from external
equipment, and OUTPUT is for signal out by
playing disc itself.
• Make sure the connection is in good
condition; volume is not too low; audio
receiver or TV work normally; audio setting is
proper.
• Check if TV Type is correct: PAL/NTSC, the
button is on the remote combined with "8".
• Due to the effect of copy protection. Avoid
connecting to a VCR or TV/VCR combination.
• Adjust the vertical hold on your TV.
• The DVD+-RW you played should be
finalized, and not be an empty disc.
• Place the disc with the graphics side up and
make sure it's inside the guide.
• Make sure the disc is free from scratches &
fingerprints.
• Insert a playable disc. (Check the disc type
and color system).
• Do not playback a disc which region code is
different from that of of your player.
• Clean the disc.
• Cancel the parental lock function or change
the parental lock level. (The Pre-set password
is 3308.)
• Reset the player.
GB-41
Customizing the Function Settings
-- Dolby Digital Setup --
Dual Mono
Dynamic
Go To Dolby Digital Setup
Stereo
L-Mono
R-Mono
MIX-Mono
-- Preference Page --
Audio ENG
Subtitle* E N G
Disc Menu ENG
Parental
Password
Default
Go To Preference Page
English
French
Spanish
Chinese
Japanese
Korean
Russian
Italian
Off
Change
RESET
1 KID SAFE
2 G
3 PG
4 PG 13
5 PGR
6 R
7 NC17
8 ADULT
9 OFF
N o t e :The Subtitle has the "OFF" option,
and none of Audio and Disc Menu has it.
High
Medium
Low
Contrast 0
-- Video Setup Page --
TV Mode Interlace
Sharpness High
Brightness 00
Contrast 00
Go To Video Setup Page
Interlace
P-SCAN
Brightness 0
FULL
3 / 4
1 / 2
1 / 4
OFF
JDP-830(IE05082).qxd 2005.4.1 4:39 PM 页面41 (1,1)