200W INTEGRATED STEREO HYBRID TUBE AMPLIFIER Model: HTA200 User Manual
Safety Information IMPORTANT SAFETY INSTRUCTIONS To reduce the risk of electric shock, do not remove cover. No user serviceable parts inside. Refer servicing to qualified personnel. To reduce the risk of fire and shock do not expose unit to rain or moisture. The unit should be connected to an earth grounded AC electrical socket. The unit should be operated in a well ventilated area. Minimum clearance is 2 inches from the ventilation openings. FCC STATEMENT 1.
Welcome Thank you for purchasing the Dayton Audio HTA200 Integrated Stereo Hybrid Tube Amplifier. This amplifier has been designed to make it easy for anyone to enjoy the warm, natural sound quality of vacuum tube amplification without the size, power consumption, and price of using traditional tube amplifiers. The HTA series from Dayton Audio achieves this by combining vacuum tubes in the preamp input section with a modern power efficient solid state Class A/B output power amplifier.
Controls and Functions Front Panel 1. POWER SWITCH/INDICATOR Turns the device on and off. 5. BASS CONTROL Adjusts the volume level for the bass output. 2. POWER INDICATOR The ring surrounding the power switch will illuminate amber when the unit is turned on. 6. TREBLE CONTROL Adjusts the volume level for the treble output. 7. HEADPHONE OUTPUT The headphone output allows you to listen to any input privately without playing audio through your speakers. The output accepts ¼” TRS headphone connectors.
Rear Panel 10. DIGITAL (OPTICAL) INPUT 15. PC-USB INPUT 11. SUBWOOFER OUTPUT Use a single RCA cable to connect the SW OUT to a powered subwoofer or separate subwoofer amplifier. 16. DIGITAL (COAXIAL) INPUT 17. LINE LEVEL (AUX) INPUT 18. PHONO INPUT 19. SPEAKER OUTPUTS Using insulated 2 conductor wire to connect to speakers. The polarity, positive (+), and negative (-) for all speaker and amplifier connections must be consistent so both the left and right speakers are in phase.
Remote Control 1. MUTE 1. When muted, the HTA200 will display ---- on it’s screen. 2. VOLUME +/1. Control the volume of the amplifier. The volume knob will rotate to indicate the current level of the amplifier. 3. TRACK TRANSPORT CONTROLS 1. Control the playback of the Bluetooth input. 2. “play/pause logo” – start/pause the current song. 3. “forward logo” – skip forward to the next song. 4. “backward logo” skip backward to the beginning of the current song or the previous song. 4. INPUT SELECTION 1.
Connecting Speakers The amplifier can power speakers with a minimum impedance of 4Ω. Using high quality two conductor speaker wire connect your speakers to the binding posts on the rear of the unit. Connect the HTA200’s left speaker terminals marked “L-” and “L+” to the corresponding “-” and “+” terminals on your left speaker. Repeat the same process for the right channel. Note: Never connect the negative terminals together or to ground.
Connecting Sources TV PC CD PLAYER WBA51 TURNTABLE The HTA200 is capable of receiving signals directly from a wide variety of sources. Using high quality cables will ensure the best possible transmission from your connected devices. Connecting a Turntable The HTA200 is capable of connecting directly to most turntables without the addition of an external phono preamplifier. 1. Ensure that your turntable is set to output a phono signal.
Troubleshooting 9
Specifications Maximum Power Output (Peak)................. 140W x 2 @ 4 Ohm RMS Power Output ..................................... 70W x 2 @ 4 Ohm Total Gain .................................................... 29 dB THD+N ......................................................... <1.5% @ Maximum Rated Output Frequency Response ................................. 15 Hz – 20,000 Hz (1 dB) Input Sensitivity .......................................... 630 mV Channel Separation ...................................
Notes Purchased on: ____________________ 11
5-Year Limited Warranty See daytonaudio.com for details daytonaudio.com tel + 937.743.8248 info@daytonaudio.com Dayton Audio® 12 725 Pleasant Valley Dr.
