User's Manual

• UH – (Usage Hours) Total operation time in hours of display since the last

data clearing. Press the Light (left) button to clear data, if desired, then

press Toggle (right) button to accept and advance to the next setting.

o Usage hours should be reset during battery replacement.

• ODO – Total Miles / KM

Total traveled distance in miles or KM since the last data clearing.

Press the Light (left) button to clear data, if desired then press the

Toggle (right) button to accept and advance to the next setting.

• SON – (Summary ON Time) Number of seconds the summary will be

displayed at the end of the workout.

o Options: 30, 60, 90, or 120 seconds

Select by using the Light (left) button and press the Toggle

(right) button to accept and exit Setup Mode.

5. To exit Setup Mode, press the Toggle (right) button several times until the computer returns

to Workout Mode.

6. Once out of Setup Mode and in the Workout Mode, the computer is ready for use.

Setup - cont’d

Installation of Cadence Sensor and Magnet – All Spinners