User's Manual

Time required:

• 15 Minutes

Parts required:

• 727-0100 Spinning

Computer Kit

NOTE: The inserts and mounting

bracket are not used on the

Elite 6900 or NXT 7000.

Tools required:

• M5 Allen Wrench

• M2 Allen Wrench

1. Install the mounting bracket to the center ﬂat section of the handlebar

by slightly prying the computer bracket clamp open.

2. Secure clamp down by tightening the M6x20 screw and M6 nut.

Mounting Computer On Handlebars - Pro 7070 / Elite 7080 / NXT 7090 Maintenance Checklist