User's Manual

45
► Display options
 In the temperature field of the display following information can
be shown with this button (in the sequence of the display):
– time (the main time of the watch, meaning T1 or T2 as in chapter 4.1)
- Tp = Thermo Peer, the temperature measured at the Thermo Peer
(only if the Thermo Peer is available and the SEND mode is
activated!). If no value is received for 2 minutes, lines will appear in this
display.
Important: The Thermo Peer must be in SEND mode for this display! Please note the
Thermo Peer instructions on this in Chapter 9 (THERMO PEER)
- positive altitude travelled *)
- negative altitude travelled *)
* These two recordings are only conducted when the stopwatch is running. As soon
as the stopwatch is set back to zero these two values will also be set back to zero.
This ensures that the time frame for which you want to monitor your climb is clearly
defined.