User's Manual

47
1) SET ALTI
The current measured altitude is blinking and can be adjusted (calibrated) up/down
with the S/R and S/L buttons.
Confirm with M. On the next display, which can be selected with S/L and S/R, you
have following options:
Curr

–

rEF-1

–

rEF-2

–

rEF-3

–

ABORT.
This determines whether the set altitude should only be taken over as current altitude
(Curr) or at the same time stored as one of the reference altitudes (rEF 1-3).
(ABORT = abort setting).
As soon as the corresponding option is on the display, confirm with M and then return
to the menu SET ALTI.
2) ALTI RECALL
This enables you to retrieve one of the 3 reference altitudes. Selectable with S/L and
S/R:
rEF-1

–

rEF-2

–

rEF-3

–

ABORT (Set reference altitudes in “SET ALTI”).
When the retrieved reference altitude appears press and release M to confirm and
return to the menu ALTI RECALL. Beforehand the selected reference altitude will
appear with the text “APPLY ALTI” for 1 second.
For ABORT the retrieval of the reference altitude will be stopped and you will move
directly to the menu ALTI RECALL.
3) ALTI ALARM
Programming an altitude alarm. The ON or OFF blinks and can be changed with S/L
or S/R. Then confirm with M.
For OFF: Return to menu ALTI ALARM
or ON: Continue to set the altitude at which an acoustic alarm should sound (setting
with S/L and S/R). If this altitude is exceeded and endless alarm will sound.