User's Manual

37
4.4 DATA LOG (RETRIEVING STORED DATA)
To operate this function please also note the short instructions!
With each Log that was stored in the SPORT function via the stopwatch or the
VERTIC-LOG numerous other data has also been stored. These LOGS can be read-
out in the DATA LOG and if necessary either individual or all LOGS can be deleted.
The memory capacity is 10 LOGs with up to 99 LAPs each.
 Press until DATA LOG appears in the display.
For approx. 1 second a number from 00 to 10 will appear above the
DATA LOG. This demonstrates how many LOGs are in the memory.
(You can, at any time, use the same button to move to the next function
unless you are in the delete function.)
The first to appear on the display is following information (“LOG DISPLAY”):

Date of the storing of LOG x
 Time of the storing of LOG x
 LOG ready to be read-out
 select LOG number with the S/R button
There are two ways to do this
 LOG delete function (individual or all) – see page 29
 Further to read-out LOG data – see page 30
• Functions and operation