User's Manual

40
► READING-OUT THE LOG DATA
As described in the beginning of this chapter you can reach the data read-out of the
LOG selected in LOG DISPLAY using the EL button.
 LOG ready for read-out
(here, as an example, “01”)
 Select LOG number with S/R button
LOG xx (select xx with S/R)
There is a lot of data available. In order to easily and understandably move around
through the data, imagine there are drawers filled with data contents that have to be
opened and closed. The operation buttons have certain logic for this purpose:
 Accept suggested selection and open a “Data-Drawer”
 Within the Data-Drawer to the next information
 Close the drawer and return to the last selection (press repeatedly
to move to the initial point, the “LOG DISPLAY”).
All data, stored either by the stopwatch or the VERTIC-LOG function after every
100 m climb, are ready for the LOGs. The only exceptions are the LAP +1000 which
are only available for the VERTIC-LOG recordings.
• Functions and operation