User's Manual

18
 This brings you to the set mode for the alarm time.
The element to be set will start to blink and a text will appear, in English,
informing you of what needs to be set.
If during setting for longer than one minute no button is pressed, the
watch will automatically leave the set mode. The settings made up
to this point will be stored.
Attention: The alarm must be activated separately!
The commands for setting the alarm time are as follows:
 With these buttons you change the setting value
 Skip to the next setting value (until you leave the set mode)
 Leave the set mode. The settings made up to here will be stored.
The alarm will sound for 1 minute and, unless the alarm function is
deactivated, will sound again the next day.
 The sounding 1 minute alarm tone can be interrupted with this button.