User's Manual

29
Operation during the climb
For each LAP during the climb,
that means while the stopwatch
is running, following data is
available:
– climbing speed in m/h as the case may be min/100 m
– in this LAP total meters climbed (UP). This means when you climb 50 m, then
descend 20 and climb 40 again that you are 70 m above the starting point
and UP 90m will be displayed.
– the LAP number alternates in a 2 second rhythm with the remaining meters until
100 m is achieved (in the example above that would be 30m)
 Following display will then appear with the above data:
In this display the last segment (LAP) is always displayed.
 With the S/L and S/R buttons you can retrieve previous recordings
which will be displayed for approx. 4 seconds.
• Functions and operation
Functions and operation •