GETTING STARTED 1 SET THE TIME. 1. Gently pull the crown out to position 2; the seconds hand stops moving. 2. Rotate the crown in either direction to move the hour and minute hands to the desired time. 3. Push the crown back in to position 1; the seconds hand restarts. 2 ACTIVATE YOUR WATCH. To turn on your watch, press and hold the top watch button until the Set Up screen is displayed on your watch.
IMPORTANT: You must make sure that your watch is connected securely to the charger. When your watch is successfully connected to the charger, it vibrates twice. NOTE: If your watch battery has depleted completely during shipping, your watch will not vibrate and a faint charging icon displays on your watch screen after 5-10 minutes. Before you charge your watch, disconnect the charger from power and thoroughly wipe the charger and watch contact pins with a soft, lint-free cloth.
B. Open the phone app, and then follow the on-screen instructions to set up your account. C. The phone app automatically searches for nearby watches. Press the top watch button 1 so that the setup screen is displayed and the app can find your watch. D. When the phone app finds your watch, select Use This Watch. When prompted by the app, press the top watch button 1 again and enter the PIN displayed on your watch. 6 SET UP YOUR WATCH USING THE PHONE APP. A. Select Set Up Watch. B.
Bluetooth status icon Appears when Bluetooth is disconnected. Charging status icon Appears when your watch is connected to power. Battery status icon Displays remaining battery charge for the battery that powers the digital functions of your watch. NAVIGATING BETWEEN WATCH VIEWS To navigate between World Clock and Activity Tracker, press button 1. In World Clock view, press button 2 to display the time in your next selected city. In Activity Tracker view, press button 2 to view yesterday’s steps.
WORLD CLOCK World Clock syncs automatically with your phone. In the app, you can select other time zones to be displayed and change the order in which the cities are displayed on your watch. Press button 2 to scroll through your selected cities. CALENDAR REMINDERS Your watch syncs with the calendar on your phone to notify you of upcoming appointments. Press button 2 to scroll for more information, such as meeting time and location. Press button 1 to dismiss the notification.
The following table describes the default vibration patterns for notifications. MANAGING INCOMING CALL NOTIFICATIONS Declining an incoming call using your watch When you receive an incoming call notification, press your watch button once to decline the call. Enabling or disabling incoming call notifications 1. In the phone app, select NOTIFICATIONS. 2. Tap the button next to CALLS to turn notifications on or off. CUSTOMIZING MESSAGE NOTIFICATIONS Enabling or disabling all message notifications 1.
MANAGING FAVORITE CONTACTS Setting your favorite contacts You can set up to 12 people as your favorite contacts. You can use the favorite contacts list to filter calls and text messages. 1. In the phone app, select NOTIFICATIONS. 2. Next to FAVORITE CONTACTS, select EDIT. 3. To remove a favorite contact, select the X next to their name. 4. To add a favorite contact, select ADD CONTACTS. 5. Scroll or use the search field to locate the name of a contact saved in your phone.
CUSTOMIZING CALENDAR EVENT NOTIFICATIONS Enabling or disabling all calendar event notifications 1. In the phone app, select NOTIFICATIONS. 2. Tap the button next to CALENDAR to turn notifications on or off. Enabling or disabling notifications from a specific calendar 1. In the phone app, select NOTIFICATIONS. 2. Next to CALENDAR, tap EDIT. 3. Scroll to the name of the app. 4. To enable notifications from a calendar for that app, select it. To disable notifications from a calendar for an app, clear it.
Enabling or disabling notifications from a specific uncategorized third-party app 1. In the phone app, select NOTIFICATIONS. 2. Next to OTHER, tap EDIT. 3. To enable notifications from a third-party app, select it. To disable notifications from a third-party app, clear it. Changing the priority of all other third-party app notifications 1. In the phone app, select NOTIFICATIONS. 2. Next to OTHER, tap EDIT. 3. Tap the slider next to PRIORITY to select either low or high priority.
3. Tap the Daily Goal box and enter your target number of steps per day. 4. Tap SAVE. CHANGING THE TIME FORMAT 1. In the app, select the settings icon. 2. Select the current setting of Time Format to switch between 12 Hour and 24 Hour. CHECKING YOUR WATCH DIGITAL BATTERY STATUS On your watch, press button 2 for 3 seconds. In the phone app, view digital battery status for your watch at the bottom of the home screen.
Reconnecting your watch to your phone If your phone and your watch are disconnected, try these methods to reconnect them in the following order: 1. Ensure that your watch is fully charged and the phone and watch are within range of each other. Press watch button 1. 2. Check ensure that Bluetooth is enabled on both the phone and your watch. 3. Open the app on your phone. 4. Close and restart your phone app. (See the manufacturer’s instructions for your phone.
PAIRING THE PHONE TO A DIFFERENT WATCH You can only pair one watch to the phone at a time. 1. In the phone app, select the settings icon . 2. Tap Remove Watch. 3. Select OK to confirm that you want to remove your watch. 4. If you are using Android, you can now pair the phone to a different watch. If you are using iOS, open your phone Settings, and then select Bluetooth. Tap the I icon next to your watch, and then tap FORGET THIS DEVICE. You can now pair the phone to a different watch.
3. Select OK to confirm that you want to remove your watch. If your watch is not connected to your phone, to reset to factory settings, press and hold button 2 while pressing button 1 three times. Press button 2 to confirm. CARE AND MAINTENANCE Charging and replacing your watch batteries Your watch contains two batteries. One battery controls the digital functions of your watch and can be recharged. The other battery controls the analog functions of your watch and is not rechargeable.
If the contact pins get wet, wipe them with isopropyl alcohol, and then dry them with a soft cloth. The contact pins must be moisture-free before you attach the charging cable. CAUTION: Do not subject your watch to a pressure/depth greater than 50 meters (5 ATM), or your watch could be damaged and your warranty voided. IMPORTANT: Do not operate your watch button or pull the crown out while your watch is wet or underwater.
FCC STATEMENT This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. The grantee is not responsible for any changes or modifications not expressly approved by the party responsible for compliance. Such modifications could void the user’s authority to operate the equipment.
ISED Statement This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. CAN ICES-3(B)/NMB-3(B) Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence.