Operating instructions

ManualsBrandsDayton Manualselectrical equipment & supplies3LW64A

Dayton Operating Instructions and Parts Manual 3LW64A, 3W735B, 3W736C, 3W737D, 3W738E, 3W739D, and 5U936D

Dayton Professional-Duty

Electric Generators

Specifications

ELECTRICAL SPECIFICATIONS

Rated Rated Amperage Rated Amperage

Model Wattage* 120V 240V

3W735B 2,200 18.3 —

3W736C 4,000 33.3 16.7

3W737D 5,000 41.7 20.8

5U936D 5,000 41.7 20.8

3W738E 6,000 50 25

3W739D 7,000 60 30

3LW64A 10,000 83.3 41.7

* Single-phase, 1.0 power factor

NOTE: Ratings apply to SAE standard conditions. Reduce ratings 3

/2% for each 1000 feet above sea level and 1% for each 10°F rise

above 60°F.

Honda Honda Fuel Fuel Tank Oil Alert Electric Weight

Model Engine H.P. Model Type Capacity System Start (pounds)

3W735B 5.5 GX160K1VX Gasoline 3.9 qt. Yes No 85

3W736C 8 GX240K1VA Gasoline 5 gal. Yes No 139

3W737D 9 GX270VA Gasoline 8 gal. Yes No 173

5U936D 9 GX270VDE Gasoline 8 gal. Yes Yes 175

3W738E 11 GX340K1VA Gasoline 8 gal. Yes No 191

3W739D 13 GX390K1VXE Gasoline 8 gal. Yes Yes 247

3LW64A 20 GX620VXA3 Gasoline 13 gal. Yes Yes 347

GENERAL SPECIFICATIONS

120V 120V, 30-Amp 120/240V, 20-Amp 120/240V, 30-Amp 120/240V, 50-Amp 120V Full

Model Duplex Twist-Lock Twist-Lock Twist-Lock Receptacle Power Switch

3W735B Yes No No No No No

3W736C Yes Yes Yes No No Yes

3W737D Yes Yes Yes No No Yes

5U936D Yes Yes Yes No No Yes

3W738E Yes Yes Yes No No Yes

3W739D Yes Yes No Yes No No

3LW64A Yes Yes No Yes Yes No

RECEPTACLE SPECIFICATIONS

ELECTRICAL COMPONENT SPECIFICATIONS

Resistance in Ohms

Stator Stator Rotor Rotor Capacitor,

Main Auxiliary Primary Secondary MFD Diodes (2)

Model Winding * Winding ∆ Winding † Winding † 450 Volt 800 Volt

3W735B 1.95 5.2 6.79 1.31 16 6 Amp

3W736C 0.71 2.17 0.54 2.07 40 70

3W737D 0.54 1.38 0.61 2.29 50 70

5U936D 0.54 1.38 0.61 2.29 50 70

3W738E 0.37 1.01 0.68 2.57 60 70

3W739D 0.28 0.78 0.77 2.9 70 70

3LW64A 0.40 0.90 0.37 0.50 80 70

(*) Connect T2 (Green) and T3 (Black). Measure resistance between T1 (Red) and T4 (Yellow).

(∆) Resistance between brown and white leads.

(†) Remove diodes to check resistance.