User Manual

Outputting Video 3-9
6 Viewing the final video in the MovieStar video window.
■
Double-click the new video in the album.
■
Your new video clip will start playing immediately.
Outputting
Video
Your edited digital movies can be output to TV/VCR, CD-R, DVD-R
or published on the Internet.
Outputting Digital
Video to TV/VCR
Follow these steps to record your edited digital movies back to video
tape, or to view them on a TV.
1
When you are ready to output your project, make sure that the Video
Out and Audio Out jacks from the back of the DVC-II Connector box
are connected to the Video In and Audio In jacks of your peripheral
device (TV or VCR) with the appropriate cables.When the
connections are secure and your external device is powered on and
ready to receive data, click the External Output button on the
bottom-right side of your MovieStar Main Interface. The button will
glow green and a window will display that you may now output to
your external device.
2
Open a video clip in the Video Window by double-clicking its
thumbnail in the Media Manager.
3
If recording to tape, press the record button on your VCR.
4 Click the Play button to start playing the file.