User Manual

Dazzle Digital Video Creator 100 User’s Guide • Getting Started • Page 13
Hardware Installation
After you install the DVC 100 software, you can install the hardware.
Installing the DVC 100 hardware is an easy, two step process, as described below.
1. Connect one end of the AC power cord to the back of the DVC 100 and the other end
to an electrical outlet.
To avoid damaging your DVC 100, use only the supplied power adapter.
2. Connect the USB cable (attached to the back of the DVC 100) to the USB port on your
computer.
Power Adapter
DVC 100
Back
USB Port
USB Cable