A6 800.4, A6 1200.4, A6 1600.4, A6 1600.1D, A6 1900.1D, A6 2800.1D Due to continuous improvement of the product the Specifications are subject to change without notice.
Low Impedance Stability slope crossover network. Channels 1 and 2 are 12db slope for the Highpass setting and channels 3 and 4 feature a selectable 12db slope on the Highpass setting and 12db or 24db slope on the Lowpass / Bandpass setting. Bass Boost For added low frequency performance the amplifiers are equipped with a selectable 6dB-12dB bass boost @ 45Hz A6 800.4 - 2 Ohms Stereo (4 Channel) A6 1200.4 - 2 Ohms Stereo (4 Channel) A6 1600.4 - 2 Ohms Stereo (4 Channel) A6 1600.1D - 1 Ohm Mono A6 1900.
A6 1600.1D, A6 1900.1D, and A6 2800.
A6 800.4, A6 1200.4, A6 1600.
( A6 800.4, A6 1200.4, A6 1600.4 ) network that allows you to select the crossover mode (Highpass—Full Range) and desired crossover point for channels 1 and 2. Channels 3 and 4 allow you to select between a Highpass 12db slope, a 12db Stereo Lowpass / Bandpass slope and a mono 24db Lowpass / Bandpass slope. For example if you wish to drive a pair of subwoofers on channels 3 and 4 out the high frequencies with a 24db slope.
Peak @ 14.4V : 2 ohms 4 ohms 4 ohms bridged Rated Power @ 4 Ohm Frequency Resp. S/N Ra o (A-weight) THD with 80k filter Low Input Level Ch 1&2 High Pass Filter Ch 3&4 High Pass Filter Ch 3&4 Low Pass Filter Bass EQ Bass Remote Capability Input Voltage Peak @ 14.4V : 1ohm 2ohm Rated Power @ 1 Ohm Frequency Resp. S/N Ra o (A-weight) THD with 80k filter Low Input Level Crossover Freq. Bass EQ Bass Remote Capability Input Voltage Dimensions A6 800.4 A6 1200.4 A6 1600.4 A6 1600.1D A6 1900.1D A6 2800.1D A6 800.