User Manual
Table Of Contents
- 1. INFORMAZIONI GENERALI
- 2. PRIMA ACCENSIONE
- 3. ESEMPI DI UTILIZZO
- 4. ACCESSORI
- 5. RISOLUZIONE DEI PROBLEMI
- 6. SPECIFICHE TECNICHE
- 1. GENERAL INFORMATION
- 2. FIRST POWER-UP
- 3. USAGE EXAMPLES
- 4. ACCESSORIES
- 5. TROUBLESHOOTING
- 6. SPECIFICATIONS
- 1. ALLGEMEINE INFORMATIONEN
- 2. ERSTMALIGES EINSCHALTEN
- 3. INSTALLATIONSBEISPIELE
- 4. ZUBEHÖR
- 5. PROBLEMABHILFE
- 6. TECHNISCHE DATEN
- 1. GÉNÉRALITÉS
- 2. PREMIER ALLUMAGE
- 3. EXEMPLES D'INSTALLATION
- 4. ACCESSOIRES
- 5. DÉPANNAGE
- 6. SPÉCIFICATIONS TECHNIQUES
- 1. INFORMACIÓN GENERAL
- 2. PRIMER ENCENDIDO
- 3. EJEMPLOS DE INSTALACIÓN
- 4. ACCESSORIOS
- 5. RESOLUCIÓN DE PROBLEMAS
- 6. ESPECIFICACIONES TÉCNICAS
28
OPERA10 OPERA12 OPERA 15
COD. 420120247 REV. 1.1
• Connect the power cable to the socket (7), then set the turning on selector (6) to ON. The Limiter LED
(3) blinks briey.
POWER SUPPLY CONNECTION
POWER SUPPLY
WARNING!
Use only good quality cables.
Replace any damaged cable to prevent malfunctioning and sound poor
quality.
CONNECTING THE OUTPUTS OF MULTIPLE MODULES (audio daisy chain)
It is possible to connect the output of an OPERA speaker to a second speaker using a cable with XLR balanced
connector, which connects the output (2) of the rst speaker to the input (5) or (4) of the second speaker.
Set the relevant selector to "LINE".
The Out Routing Selector (2) in "CH1 link" position allows providing the output of the second speaker with only
the signal coming from the CH1 (5) channel. In the "Mix Out" position, it allows the CH1 (5) and CH2 (1) channel
mixing.
English