User Manual

34
OPERA10 OPERA12 OPERA 15
COD. 420120247 REV. 1.1
RMS amplier power:
Peak power:
600 W
1200 W
PROCESSOR
INPUTS
Internal controller:
Inputs:
Outputs:
A/D D/A converter:
56-bit DSP
1x balanced/unbalanced Combo (XLR/Jack)
24 bit/48 kHz
1x XLR link OUT
Peak, RMS, Thermal
Limiter:
USER INTERFACE
Controls: Level control, ground lift switch, 8-position DSP preset rotary switch
Draw at 1/8 of full power in average
use conditions (*):
0,92 A (230 V) - 1,65 A (115 V)
Draw at 1/3 of full power in
maximum use conditions (**):
2,25 A (230 V) - 4,05 A (115 V)
Draw with speaker turned on without
signal (idle): :
14 W
Inrush current:
14,07 A
POWER SUPPLY SPECIFICATIONS
* INSTALLER NOTES: The values refer to 1/8 of full power, in average operating conditions (music program with infrequent or no clipping). It
is recommended to consider them the minimum sizing values for any type of conguration.
** INSTALLER NOTES: The values refer to 1/3 of full power, in heavy operating conditions (music program with frequent clipping or activation
of the limiter). We recommend sizing according to these values in case of professional installations and tours.
English