User Manual

SPECIFICATIONS
HPA 1000 HPA 1400 HPA 2800 HPA 3100L
Max Power Output
STEREO / MONO mode
2ohm --- --- 2 x 1400W 2 x 1700W
4ohm 2 x 510W 2 x 740W 2 x 1050W 2 x 1200W
8ohm 2 x 330W 2 x 440W 2 x 680W 2 x 800W
BRIDGE mode
4ohm --- ---- 1 x 2800W 1 x 3400W
8ohm 1 x 1020W 1 x 1480W 1 x 2100W 1 x 2400W
Amplifier Class Class AB Class H Class H Class HD
Frequency Responce 20Hz to 20KHz +0dB/-0.3dB @8ohm
Distorsion (THD+N) <0,05% @ 1KHz and 1dB below cliping
Intermodulation (SMTE IMD) <0,05% @ 8ohm
Damping Factor >300@1KHz/8ohm >1000@1KHz/8ohm
Slew Rate 50V/uS 55V/uS
Signal To Noise ratio 105dB 105dB 106dB 108dB
Input sensitivity 26dB setting 2,4V 2,8V 3,6V 4,0V
32dB setting 1,2V 1,4V 1,8V 2,0V
Input gain 1,4V setting 30,9dB 32,1dB 34,2dB 35,1dB
Limit switch On/Off
Mode switch Stereo/Bridge/Mono
10Kohm unbalanced
REAR PANEL
Input connectors 2 x XLR Female
Link connectors 2 x XLR Male
Output connectors 2 x Speakon
FRONT PANEL for each channel
Level indicators Green LED (from -30dB to 0dB)
Limit indicators Yellow LED
Protection indicators Red LED
Controls volume 41 pos detent
Protections Temperature, DC, RFI, short circuit, Thermal power transformer
Cooling 2 variable - speed fan
Power supply 220-230Vac 50/60Hz
Circuit breaker (Powerswitch) T8A T10A T15A T15A
Rear socket power supply VDE -15A VDE -15A VDE -15A VDE -15A
Dimension (WxDxH) mm 483x400x89 483x400x89 483x400x89 484x431x89
Rack Heigt 2U 2U 2U 2U
Net weight 15,25Kg 17,25Kg 21,35Kg 14Kg
Input impedance 20Kohm balanced /
27 28