Owner manual

user manualuser manual
EnglishEnglishEnglish
7
EnglishEnglishEnglish
user manualuser manual
8
CHANNEL CONNECTION
DO NOT CONNECT BOTH RJ 45 AND XLR
CONNECTORS T0 THE SAME RDNET PORT!
RJ 45 CONNECTOR
Pin
1 – available for other functions (for example: audio signal +, hot)
2 – available for other functions (for example: audio signal –, cold)
3 – available for other functions (for example: analogue ground)
4 – digital ground
5 – digital ground
6 – available for other functions (for example: power supply)
7 – RS 485 A
8 – RS 485 B
XLR SOCKET
Pin
1 – digital ground
2 – RS 485 A
3 – RS 485 B
SUBNET CONNECTION
Each of the 2 available RDNET ports of the RDNET CONTROL 2 unit can be connected to
max. 32 compatible devices (linked in ‘daisy-chain’).
Example: the RDNET CONTROL 2 port 1 is connected to the DATA IN input of a DVA T12
loudspeaker, of which DATA LINK parallel output is linked to the input of the following DVA
T12 loudspeaker.
In the example above, [n] is a number from 3 to 32 (max. quantity of devices that can be
connected to a subnet).
The total CAT 5 cable length of a subnet cannot exceed 900 metres (c. 2950 feet).
RJ 45
|1|2|3|4|5|6|7|8|
XLR
33
1122
Data
Input
Data
Link
Link
Active
RDNET
PUSH
PUSH
Data
Input
Data
Link
Link
Active
RDNET
PUSH
PUSH
Data
Input
Data
Link
Link
Active
RDNET
PUSH
PUSH
NOTES ABOUT THE RDNET SOFTWARE
The RDNET software is protected by international copyright laws and is to be used to
configure the dB Technologies RDNET system only.
It is not allowed to modify or change or try to decompile this software.
In no event shall dB Technologies be liable to end-users for any damage whatsoever,
including but not limited to financial damages for loss of business profits or business
information due to the software use or inability to use this product. The foregoing provision
is effective even if dB Technologies has been advised of the possibility of such damages.
Even if the software has any material, verifiable and reproducible program errors,
dB Technologies shall have no obligation to modify such errors.
CH 1
RDNET
CONTROL 2
PUSH
DVA T12 [1] DVA T12 [2]
DVA T12 [n]
I A
S SPECIF
C TION
etN
work:
st nd
r EIA R
5
a a
d S-48
u o
a g su
etp t
2 m na
ed
bn
m
32 e
ic s con
cte
to
ch u e
ax. d
v e ne
d ea s
bn t
R
ET con
t
s DN
nec ion :
R
5
n r
Et
r
o A
ca2 J 4 con ecto
s ( he
C
n) for C T 5
ble
t e - l X
o e
l r
at ve
R 5)2
hr
e
po e LR
s ck
t (as a te
n
i
to J 4
P c n t :C
o
nec
ion
B)USB (type
P
we ply o
r sup
:
o
er d
U
e
t p w e by
SB
T
yp B socke
M
chanic
chara t
s
e al cteris ic
:
BS a
c B
l c l r
A Pl sti OX, B
a
k co o
im
s ns (
x
D
1
0,
, m
D
en io W Hx
): 1
1x4
5x89 5 m
e t:
5N
t weigh 17 gr
DVA Network
RDnet CONTROL 2 is equipped with proprietary network interface, called RDNET, for PC
interface.
For this purpose, a proprietary communication protocol has been developed for receiving
and sending data; this connection permits real-time monitoring of the diffuser parameters,
such as output power, amplifier temperature, limiter status, etc...
It is also possible to select various equalizations or create new ones, set the desired
volume levels using the specific plug-in.
It is recommended to download DVA Network free software directly from
dB Technologies (www.dbtechnologies.com) in the special section
«Software & Controller»
DOWNLOAD
CH2
111mm
89,5mm
40,5mm
CH1
EMI CLASSIFICATION
According to the standards EN 55103 this equipment is designed and suitable to operate in E3
(or lower E2, E1) Electromagnetic environments.