Quick start guide

www.dbtechnologies.com [e-mail]
Rev 1.2 cod. 420120227Q
4) Ready in less than a minute
The internal DSP provides an easy setup and routing of
all the inputs and allows to configure quickly the ES503
The ES503 is managed through a complete channel
strips that allows the user to control channel
parameters and choose the output routing.
Set up instructions:
Push the rotary encoder over the Menu Item and then
on System Settings. Here an easy wizard helps you to
setup the ES503 System as you desire. Mono, stereo or
double column mode.
Pushing on the next icon, the
wizard will indicate how to
manage the MIC/Inst input, the
line inputs in mono or stereo
setup .
Besides, it’s possible to assign the auxiliary output as
Monitor (enabling the anti-feedback notch filter in
Advanced Setup) or Auxiliary output. In Double Column
mode, this output will be dedicated to send the Left or
Right signal to the other ES503 System.
Holding the rotary encoder the
ES503 will be back at the home
Menu.
Holding the rotary in the Home
menu the EASY MIXER will appear, so that the user can
mix the inputs, setup outputs’ volume, adjust the main
or sub’s volume.
Follow the wizard’s instruction to get your ES503 ready
in less than a minute.
5) Bluetooth
The ES503 Entertainment System is equipped with a
Bluetooth receiver. To enable the bluetooth go to
MenuBluetooth SettingsON
The audio streaming will be enabled over the channels
1 and 2 (Line Inputs).
6) Coverage
The Internal speakers position are designed to improve
the vertical coverage from the first row to the further
seats of the venue. The specially designed phase plugs
allow a wide horizontal coverage as well.
7) Advanced Settings submenu:
In the Advanced Setting menu you can set the
subwoofer level and the Aux notch anti-feedback
filter:
Go to: MenuAdvanced Setting.
8) Eq Preset
The ES503 DSP provides 6 EQ presets and 1 Custom
storable user eq. Go to MenuDSP Preset.
ES503: a space-saving, user-friendly,
powerful system to enjoy your music
anytime, anywhere.