User manual

28
ES 602 - 802 Cod. 420120228 REV. 1.2
8. LINE/MIC SELECTOR
It allows to select whether the incoming signal is a line signal or whether it comes from a microphone.
9. POWER SWITCH
ON (I) OFF (0) system power supply switch
10. POWER SUPPLY INPUT
Input for the connector of the supplied power cord.
11. SATELLITE CONNECTION OUTPUT
Output allowing to connect the system to the ES-TOP A satellite
through a SPEAKON balanced cable.
12. MAINS FUSE
POWER SUPPLY AND SATELLITE CONNECTION SECTION
ATTENTION!
• The speaker is supplied equipped with
a pre-installed fuse designed to operate
within the 220-240 V range. If the system
must operate within the 100-120 V range:
1. Disconnect all connections, including the
power supply one
2. Wait for 5 minutes
3. Replace the fuse with the one included in
the package for the 100-120 V range
English