User manual
Table Of Contents
- 1. INFORMAZIONI GENERALI
- 2. PRIMA ACCENSIONE
- 3. ESEMPI DI UTILIZZO
- 4. ACCESSORI
- 5. RISOLUZIONE DEI PROBLEMI
- 6. SPECIFICHE TECNICHE
- 1. GENERAL INFORMATION
- 2. FIRST POWER-UP
- 3. USAGE EXAMPLES
- 4. ACCESSORIES
- 5. TROUBLESHOOTING
- 6. SPECIFICATIONS
- 1. ALLGEMEINE INFORMATIONEN
- 2. ERSTMALIGES EINSCHALTEN
- 3. ANWENDUNGSBEISPIELE
- 4. ZUBEHÖR
- 5. PROBLEMABHILFE
- 6. TECHNISCHE DATEN
- 1. GÉNÉRALITÉS
- 2. PREMIER ALLUMAGE
- 3. EXEMPLES D'UTILISATION
- 4. ACCESSOIRES
- 5. DÉPANNAGE
- 6. SPÉCIFICATIONS TECHNIQUES
- 1. INFORMACIÓN GENERAL
- 2. PRIMER ENCENDIDO
- 3. EJEMPLOS DE USO
- 4. ACCESORIOS
- 5. RESOLUCIÓN DE PROBLEMAS
- 6. ESPECIFICACIONES TÉCNICAS
24
SUB 615 - SUB618 Cod. 420120251 REV. 1.0
INPUT, OUTPUT AND CONTROL SECTION
1. INPUTS
XLR (balanced) input connectors. They may be used for mono or stereo connection. For further details
concerning connection, refer to INPUT CONNECTIONS AND AUDIO DAISY CHAIN.
4. Outputs Mode
Selector allowing to set the type of output signal (Link/Xover). It acts on the daisy-chained signal from
OUTPUT connectors [2].
5. Polarity
and Subwoofer Mode buttons
Buttons allowing to control (Normal or Reverse) Polarity and the type of output ltering (Flat, i.e. without
equalisation, Boosted, i.e. low frequencies are emphasised).
3. Subwoofer Level
Rotary switch to adjust output audio level.
2. OUTPUTS
XLR (balanced) output connectors. They may be used for mono or stereo connection. For further details
concerning connection, refer to INPUT CONNECTIONS AND AUDIO DAISY CHAIN.
6. LED (Limiter, Signal/ON)
Indicator LEDs. The Limiter LED turns on when the internal protection circuit is triggered, while Signal/ON
indicates subwoofer power-up as well as the presence of an input audio signal.
English