User Manual
Table Of Contents
- 1. INFORMAZIONI GENERALI
- 2. PRIMA ACCENSIONE ED INSTALLAZIONE
- 3. AGGIORNAMENTO DEL FIRMWARE
- 4. RISOLUZIONE DEI PROBLEMI
- 5. SPECIFICHE TECNICHE
- 1. GENERAL INFORMATION
- 2. FIRST START-UP AND INSTALLATION
- 3. FIRMWARE UPDATES
- 4. TROUBLESHOOTING
- 5. SPECIFICATIONS
- 1. ALLGEMEINE INFORMATIONEN
- 2. ERSTMALIGES EINSCHALTEN UND MONTAGE
- 3. FIRMWARE-AKTUALISIERUNG
- 4. PROBLEMABHILFE
- 5. TECHNISCHE DATEN
- 1. INFORMATIONS GÉNÉRALES
- 2. PREMIER ALLUMAGE ET INSTALLATION
- 3. MISE À JOUR DU MICROLOGICIEL
- 4. DÉPANNAGE
- 5. SPÉCIFICATIONS TECHNIQUES
- 1. INFORMACIÓN GENERAL
- 2. PRIMER ENCENDIDO E INSTALACIÓN
- 3. ACTUALIZACIÓN DEL FIRMWARE
- 4. RESOLUCIÓN DE PROBLEMAS
- 5. ESPECIFICACIONES TÉCNICAS
DVA MINI G2 Code 420120326 REV.1.0
English
2. FIRST START-UP AND INSTALLATION
PACKAGE CONTENTS
INSTALLATION
A complete set of accessories
(DRK-M5 and DT-8MINI as
well as other ones that can be
viewed on the website at www.
dbtechnologies.com) enables fast
and effective installation. Purely
indicative illustrations are shown
below to show installation. For
any information on accessories,
please follow the relevant
instructions.
For examples of connections, see
the section below.
When you open the LVX XM12 speaker package, ensure that all contents are present. The package contains:
• DVA MINI G2
• quick start user manual and warranty documents
• fuse rated for operation in the 100-120V voltage range
ATTENTION!
The fuse installed at the factory is rated for operation in the 220-240 V
voltage range. If you need to operate the speaker in the 100-120 V range:
1. Disconnect all connections, including the power supply connection.
2. Wait 5 minutes.
3. Replace the fuse with the fuse rated for the 100-120 V range, which is included in the package.
4. Use only the supplied power supply cable.
DRK-M5
DT-8MINI