User Manual


DVA MINI G2 Code 420120326 REV.1.0
English
4. TROUBLESHOOTING
1. Check that power supply is present upstream of the installation.
2. Check that the power supply or the re-link connection of the power supply is properly inserted
1. Check that the audio signal input connections or the audio signal re-links are properly carried out.
2. Check that the audio source (mixer) is properly connected and active.
3. In case of RDNet network connection and control with AURORA NET, check that the MUTE function is
disabled
1. Re-check the project, the installation and conguration specications using DBTECHNOLOGIES
COMPOSER.
2. Verify that the DSP PRESET parameters are actually replicated on the control panel of the module
(especially if the remote control of the modules is not used).
3. Check that, in case of RDNet network connection and control with AURORA NET, all the parameters are
properly set.
The loudspeaker will not turn on:
The speaker turns on but produces no sound:
Speaker sound is unsatisfactory: