User Guide User Guide AC1200 Gigabit Dual Band Wi-Fi Router T18 Pro 1
User Guide Contents About this Guide Chapter 1. Get to Know About Your Router Chapter 2. Connect to the Internet Chapter 3. Revise Wi-Fi Password Chapter 4. Configure EasyMesh Chapter 5.
User Guide About this Guide This user guide shows you the way to configure the router appropriate to your needs. Chapter 1. Get to Know About Your Router This chapter introduces the main features and shows its appearance. It chapter contains the following sections: Main Features Appearance 1.1. Main Features ①: Superfast dual band Wi-Fi, up to 1.2Gbps Wi-Fi speed, 300Mbps 2.4GHz, 867Mbps 5GHz. ②: All gigabit ports, support 1000Mbps WAN port and three 1000Mbps LAN port, for fast data transfer speed.
User Guide Chapter 2. Connect to the Internet This chapter introduces how the router connects to the Internet. It chapter contains the following sections: Schematic Diagram of Router Connection Configure the Internet 2.
User Guide 2.2 Configure the Internet 2.2.1 Configure the Router in Gateway Mode 2.2.1.1 Dial-up for Internet Access After the connection is completed, use a mobile phone or computer to search for the Wi-Fi name "2.4G SSID or 5G SSID" on the label on the back of the device and enter the corresponding password to connect to Wi-Fi. Open the mobile phone or computer browser, visit the 192.168.10.
User Guide In the router management interface, click "Install-Install Settings" and select "PPPoE". Fill in the User Name and Password, click "Save". Wait for the device to be saved and Internet access is available. The Wi-Fi name is the default name (in the label at the bottom of the device). 2.2.1.
User Guide 2.2.1.3 Dynamic IP for Internet Access The router is defaulted to dynamic IP (DHCP Client) for Internet access. The Wi-Fi name is the default name (in the label at the bottom of the device). 2.2.2 Configure the Router in Bridge Mode After the connection is completed, use a mobile phone or computer to search for the Wi-Fi name "2.4G SSID or 5G SSID" in the label at the bottom of the device, enter the password, connect to the Wi-Fi, and then you can surf the Internet. 2.2.
User Guide In the router management interface, select "Network—5G Configuration Settings—Network Scan", click Scan, select the uplink signal, fill in the upper-level Wi-Fi key, and click Connect. Chapter 3. Revise Wi-Fi Password This chapter introduces how to revise Wi-Fi Password. Revise Wi-Fi Password In the router management interface of 192.168.10.1, click the "Install-Install Settings", you can customize the 2.4G and 5G "wireless name and wireless password".
User Guide Chapter 4. Configure EasyMesh This chapter introduces how to configure EasyMesh. It chapter contains the following sections: The Steps to Configure EasyMesh How to Check the Device Information in Topology 4.1 The Steps to Configure EasyMesh Step 1: set up the Controller In the router management interface connected to the upper-level gateway (optical modem), select "Network—EasyMesh—General", in the general settings page: Fill in “Mesh Controller” in “Device Name”. Select “Controller” in "Role".
User Guide Step 2: set up the Agent The Agent needs in the Bridge mode as in in 2.2.2. In the router management interface of other routers (except the router set in the first step), select "Network—EasyMesh—General", in the general setting page: Fill in "Mesh Agent” in “Device Name". Select "Agent" in "Role". Click the "Save & Apply" interface button.
User Guide EasyMesh networking of three or more devices, perform step 2 on the third and above equipment. 4.
User Guide you can see the device name and IP address. After the EasyMesh of the router is closed, the device will depart from the original EasyMesh network. When it is turned on again, you need to rejoin the network, and perform step 2 and step 3. Chapter 5. Other information This chapter introduces precautions, warnings and after-sales service commitment.
User Guide Operating temperature：0-40°C 5.2 Manufacturer Information Manufacturer: Shenzhen Micronet Force Information Technology Co., Ltd. Address: Room 808, Block B, Fu'an Science and Technology Building, No. 013, Gao Xin Nan Yi, Nanshan District, Shenzhen, Guangdong, China 5.3 Precautions ① After completing EasyMesh networking, the master device will synchronize its 2.4GHz and 5GHz SSID, password, and channel with the slave device once.
User Guide equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: ‐‐Reorient or relocate the receiving antenna. ‐‐Increase the separation between the equipment and receiver. ‐‐Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
