User Manual

Quick & Easy
10
Quick & Easy
This page provides some of the basic operations for
using your phone. For more detailed information,
refer to “User Manual”.
Before Use
1. Remove the battery and insert your SIM card,
then re-install and charge the battery. For more
details, please refer to “Installation”.
2. Press and hold
to turn on your phone. Wait
until the name of the network operator appears
on the screen.
Call Functions
Making calls
In idle mode, key in the area code, the phone
number and press
to make a call.
Answering calls
Press to answer a call. Alternatively, simply
open the phone cover to answer a call if the handset
cover is closed (if “Flip Answer” is activated).
Hands free conversation
Press and hold to use the hands free function
for conversation.
Terminating calls
Press or simply close the phone cover to end
an active call.
Refusing calls
Press or or simply close the handset
cover to refuse an incoming call. Alternatively, press
and hold or to reject the incoming call
without opening the handset cover.
Emergency calls
In idle mode, key in the emergency call number and
press
to contact the local emergency services
center.
PhoneBook Functions
Add new
Adding new numbers and names to handset or SIM
card.
1. In idle mode, key in the phone number and press
.
2. Select either “Add Name”, “Quick Save” or “Add
To Exist Name” and press
.
3. If “Quick Save” is selected, the entry will be
stored in the handset without editing.
4. If “Add Name” is selected, perform the following
steps:
(1) Key in the name and press
.
(2) Select either “Save To SIM” or “Save To
Handset” and press .
(3) If “Save To SIM” is selected, key in the location
number to where the entry is to be saved and
press
.
(4) If “Save To Handset” is selected, select the
desired group and press
to continue
setting the related information.
(5) Select “Handset”, “Office” or “Home” to define
the attributes of the entry.
5. If “Add To Exist Name” is selected, perform the
following steps:
(1) Select the location of the new number and
press
.
(2) If the selected location already has a number, it
will be replaced; if the selected location is
blank, the new number will be saved there.
Note
If the selected entry exists in the SIM card, the old
number will be replaced.
Other Functions
Clear screen
Press and hold to clear an entry that you are
editing.
Adjusting the earpiece volume
You can adjust the earpiece volume by using or
to increase or decrease the volume during a call.
Backlight
Backlight
When pressing a key or answering an incoming call,
the backlight will automatically turn on for a few
seconds.