User Manual

Access Codes
49
Access codes
There are several codes required to access the
handset and SIM card. The access codes allow you
to avoid unauthorized use of your phone and SIM
card.
PIN code
The PIN (Personal Identification Number) protects
the card against unauthorized use. This code is
supplied with the SIM card. If the PIN is activated,
the code is requested when the phone is switched
on.
If you enter an incorrect PIN code three times in
succession, the SIM card is blocked; key in the PUK
code.
PIN2 code
This code is supplied with the SIM cards and is
required to access certain functions, such as
accumulated costs. If your SIM card supports those
particular functions, you can activate them in your
handset. If you enter an incorrect PIN2 code three
times in succession, the PIN2 code is blocked and
you will be asked for the PUK2 code.
PUK code
The PUK (Personal Unblocking Key) code is used to
unblock and change the locked PIN code. This code
may be supplied with the SIM card. If this is not the
case, check with your network service provider for
the code. If you enter an incorrect PUK code ten
times in succession, your SIM card will no longer be
valid.
Contact your network service provider to replace the
SIM card.
PUK2 code
The PUK2 code is used to unblock and change the
locked PIN2 code. This code is supplied with the
SIM card. If you enter an incorrect PUK code ten
times in succession, the functions that require PIN2
code in order to be activated will no longer be valid.
Contact your network service provider to replace the
SIM card.