User guide

Error Code
675
16
DBX 32
005
The base didn't
receive the width sta-
tus from the dynamic
scale
Ask customer to check
dynamic scale wiring
Check inserter con-
nection and para-
meters
DBX 32
006
The base receive a too
large value for the
width
Check connection bet-
ween inserter and base
Check the connec-
tion and parameters
DBX 32
007
The base receive a too
large value for the
length
Check connection bet-
ween inserter and base
Check the inserter
connection and
parameters
DBX 32
008
The base receive a too
large value for the
thickness from inserter
Check connection bet-
ween inserter and base
Check inserter con-
nection and para-
meters
DBX 32
009
The base receive a too
large value for the
thickness
Check connection bet-
ween inserter and base
1 Check the con-
nection
2 Check the dyna-
mic scale board
DBX 32
010
The base receive a too
large value for the
length from dynamic
scale
Ask customer to check
dynamic scale wiring
1 Check connection
2 Check dynamic
scale board
3 Check length sen-
sor
DBX 32
014
Frankit message: (GER) This message appear when
the JOB memory is full (10 rooms) and customer
save a new JOB, is informed that the oldest JOB will
be overwrite
DBX 32
015
Frankit message: (GER) This message appear when
the EKP memory is full (10 rooms) and customer
save a new EKP, is informed that the oldest EKP will
be overwrite
DBX 32
016
Frankit message:
(GER) This message
appear when the cus-
tomer try to select EKP
and system still in fran-
king mode
Wait franking to be finished ant then do EKP
selection
DBX 32
017
Frankit message:
(GER) This message
appear when the cus-
tomer try to select JOB
and system still in fran-
king mode
Wit franking to be finished ant then do JOB selec-
tion
DBX 32
018
EKP creation failed
Code Description Helpdesk On site