User guide

Error Code
698
16
DWA 11
002
there is an envelope
jammed in the dyna-
mic scale area: entry
sensor
1 Take out the envelope that is on the Dynamic
scale
2 Clear the message (press OK key)
3 Check the mail, then continue the "entry sen-
sor" may need to be cleaned (dust , etc..) or
replaced
SLC
203
"SLC203 Installation
Alert!. base model not
authorized or expec-
ted for this meter. Con-
firm base model "
Online Services error
message
The SLC203 Online Services error message is a
default setting that occurs after declaration is
completed.
Once it is cleared, the setting is changed and
there should not be any further problems.
There is no problem with the base, meter or
Online Services.
Code Description Helpdesk On site