User's Manual
Table Of Contents
- Overview
- Installation
- User Interface & Connectors
- Getting Started
- Configuring The VENU360
- Operating The VENU360
- Manually Optimizing A System Using The VENU360
- Processing Modules & Parameters
- Inputs Module
- Router Module
- Mixer Module
- Advanced Feedback Suppression (AFS) Module
- Automatic Gain Control (AGC) Module
- Delay (DLY) Modules
- Compressor (CMP) Module
- Graphic EQ (GEQ) Module
- Noise Gate (GAT) Module
- Parametric EQ (PEQ) Modules
- AutoEQ (AEQ) Module
- Subharmonic Synth (SUB) Module
- Crossover Module
- Limiter (LIM) Module
- RTA
- Utility Menu
- Power-Up Functions
- Application Guide
- Application 1: Full Range Mains
- Application 2: Full Range Mains + Subs
- Application 3: Bi-Amplified Mains + Aux-Fed Subs
- Application 4: LCR Full Range Powered Mains + Subs
- Application 5: Full Range Stage Monitors
- Application 6: Bi-Amplified Stage Monitors
- Application 7: Using The AES Digital Inputs
- Application 8: BLU Link Application (VENU360-B)
- Application 9: Dante Application (VENU360-D)
- Preset List
- Using The VENU360 Control Application
- Networking
- Technical Information
- Additional Resources
113
Using The VENU360 Control Application
The DriveRack VENU360 control application is available for Android
™
, iOS
®
, Mac
®
, and Windows
®
compatible devices. This
application is available for free and can be downloaded on the iTunes Store
®
, Google Play™, or from www.dbxpro.com.
The DriveRack VENU360 control application can be used to perform most of the same functions available from the
VENU360’s front panel, such as running all Wizards, changing configurations, viewing the RTA, editing processing parameters,
and managing presets. The DriveRack VENU360 control app also adds the ability to connect directly to the online tuning
database (Internet connection required), where you can download additional tunings from Crown
®
,
JBL
®
, dbx
®
, and more!
NOTE: You can control one VENU360 device on the network at a time using the VENU360 control app. Multiple control
devices can be connected to the VENU360 simultaneously, however, it is best to control the VENU360 from only one device
at a time for best performance. For example, you may have the app running on a laptop that sits next to the mixing console
and remains active during the entire performance and used for the RTA and occasional tweaks, and then use a tablet
periodically when walking around the venue and making adjustments. Performance will be determined by the speed of the
wired and/or wireless network. Generally speaking, connecting up to 3 apps simultaneously should work fine on standard
10/100 Mbps wired and 802.11n Wi-Fi networks.
Device Requirements
Visit dbxpro.com for the latest information on device requirements for the DriveRack VENU360 control application.