User's Manual

11 8
DSP Block Diagram
or
BLU LINK
IN
VENU360-B
DANTE
PRI/SEC
VENU360-D
or
BLU LINK
OUT
VENU360-B
DANTE
PRI/SEC
VENU360-D
IN1 IN2 IN3 IN4 IN5 IN6 IN7
IN7
IN6
IN5
IN4
IN3
IN2
IN1
RTA MIC INPUT
**SIGNAL GENERATOR
SIGNAL GENERATOR
***RTA SOURCE
BUS A MID 1
MID 2 MID 3 MID 4 MID 5 MID 6
BUS 1 BUS 2 BUS 3
BUS B
BUS C
1 2 3
A
B
C
CH1 CH2 CH3 CH4 CH5 CH6
RTA
MIC INPUT
Front-Panel
OUTPUT
Meters
Front-Panel
OUTPUT
Mutes
Front-Panel
MIX/ROUTE
Mutes & Meters
Congurable Inserts:
AGC
Compressor
Noise Gate
Subharmonic Synth
Fill Delay
Congurable Inserts:
AGC
Backline Delay
31-Band Graphic EQ
Compressor
Noise Gate
12-Band Parametric EQ
Subharmonic Synth
*ANALOG1
*AES1 *AES2
*ANALOG3
ANALOG 3
*Default Input channel assignments� Input channel assignments can be edited in VENU360-B and VENU360-D models to include BLU link or Dante channels� **Signal Generator can be routed to any single input (IN1-IN7) or all inputs simultaneously (IN1-IN7)� Input channels are “unrouted” when Signal Generator is routed to a channel� ***RTA source selections includes: RTA Mic Input, Signal Generator, IN1-IN7, or Buses (including bus summing options listed below)� The following routing/mixing options are available for each output procesing chain: IN1, IN2, IN3, IN4, IN5, IN6, IN7, mix all inputs (IN1-IN7), Bus 1, Bus 2, Bus 3, Bus 1+2 sum, Bus 2+3 sum, Bus 1+2+3 sum, mix Buses 1/2/3, Bus A, Bus B, Bus C, Bus A+B sum, Bus B+C sum, Bus A+B+C sum, mix Buses A/B/C�
Output Input
ANALOG 1
AES CH 1 & 2
INPUTS
OUTPUTS
*ANALOG2
*AES3 *AES4
ANALOG 2
AES CH 3 & 4
Inputs (IN1-IN7)
AutoEQs
Advanced Feedback Suppression
Input Inserts 2
Input Inserts 1
Input Routers/Mixers
Real Time
Analyzer
(RTA)
Signal
Generator
Mid Routers/Mixers
Mid Inserts
Crossovers
8-Band Parametric EQs
Limiters
Driver Alignment Delays