User's Manual

47
Copying Presets
Presets can be copied from one memory location to another. This can be useful for creating a backup of a preset within the
VENU360 box, creating variations of similar presets, or for creating an initial preset template and then copying that preset
template for use at each venue the system is used.
To copy a preset:
1. Recall the preset you wish to copy
(see ‘Recalling Presets’ on
page 45).
2. Press the STORE button.
3. The current name of the preset
will be shown in the LCD display
and you now have the option to
keep it or rename it. If you do not
wish to rename the preset, proceed
to step 4. If you do wish to rename
the preset, follow the on-screen
instructions.
4. Press the STORE button a second
time.
5. Turn the SELECT wheel to select
the user preset memory location
you wish to copy the preset to.
WARNING! The preset residing in
the selected memory location will
be overwritten.
6. Press the STORE button a third
time or the SELECT wheel to
copy the preset to the new preset
memory location. Note that the
preset that was residing in the
selected memory location will be
permanently overwritten.