User's Manual
Table Of Contents
- Overview
- Installation
- User Interface & Connectors
- Getting Started
- Configuring The VENU360
- Operating The VENU360
- Manually Optimizing A System Using The VENU360
- Processing Modules & Parameters
- Inputs Module
- Router Module
- Mixer Module
- Advanced Feedback Suppression (AFS) Module
- Automatic Gain Control (AGC) Module
- Delay (DLY) Modules
- Compressor (CMP) Module
- Graphic EQ (GEQ) Module
- Noise Gate (GAT) Module
- Parametric EQ (PEQ) Modules
- AutoEQ (AEQ) Module
- Subharmonic Synth (SUB) Module
- Crossover Module
- Limiter (LIM) Module
- RTA
- Utility Menu
- Power-Up Functions
- Application Guide
- Application 1: Full Range Mains
- Application 2: Full Range Mains + Subs
- Application 3: Bi-Amplified Mains + Aux-Fed Subs
- Application 4: LCR Full Range Powered Mains + Subs
- Application 5: Full Range Stage Monitors
- Application 6: Bi-Amplified Stage Monitors
- Application 7: Using The AES Digital Inputs
- Application 8: BLU Link Application (VENU360-B)
- Application 9: Dante Application (VENU360-D)
- Preset List
- Using The VENU360 Control Application
- Networking
- Technical Information
- Additional Resources
7
To connect to a Wi-Fi network router:
1� Download and install the free DriveRack VENU360
control app on the iTunes Store
®
, Google Play™, or from
www.dbxpro.com.
2� Connect a straight-through CAT5, CAT5e, or CAT6
Ethernet cable (sold separately) to the Ethernet port on
the VENU360.
NOTE: A crossover Ethernet cable can also be
used as long as the switch or router is capable of
auto-sensing the type of Ethernet cable connected
and reconfiguring itself accordingly (referred to as
auto-MDI/MDIX sensing).
3� Connect the other end of the Ethernet cable to one of
the Wi-Fi router’s LAN ports.
4� Connect to the Wi-Fi network using your Wi-Fi
equipped computer or device.
5� Apply power to the VENU360 (ensure the amplifiers are powered off, see ‘Applying Power’ on page 4 for more
information). Wait for the VENU360 to initialize and give it time to negotiate with the network so it can be assigned an
IP address – this can take a few minutes. You can ensure the VENU360 has been assigned an IP address by pressing
the UTILITY button then selecting the “SYSTEM INFO” option or by pressing the SELECT wheel from Home mode and
selecting the “SYSTEM INFO” home screen option.
6� If connecting using a static IP address, enter the VENU360 Utility menu by pressing the UTILITY button. Select the
“NETWORK” option then configure the network settings to connect to your network.
TIP: For more information on networking, including troubleshooting tips, see ‘Networking’ on page 114.
Wi-Fi Network Router Connection
WAN LAN
1 2 3 4
Ethernet Router
DriveRack VENU360
Mac
®
or Windows
®
Computer
Ethernet Switch
Crossover Etherent Cable
DriveRack VENU360
Mac
®
or Windows
®
Computer
or
DriveRack VENU360
Wi-Fi Router
WAN LAN
1 2 3 4
Mac
®
or Windows
®
Computer With Wi-Fi
Android
™
or iOS
®
Tablet
DriveRack VENU360
Mac
®
or Windows
®
Computer