Instruction Manual

3.5 Navigating the Comp/Limiter Section
Navigating the Compressor/Limiter Section
The Comp/Limiter button
toggles through
the Compressor or
Limiter modules.
COMP
Comp On/Off
Over Easy Off, 1-10
COMP/LIMITER
Threshold -40-20dB
Ratio 1:1 to ∞Inf:1
Gain -20 to 20dB
LIMITER
Limiter On/Off
Over Easy Off, 1-10
Threshold -40-20dB
COMPRESSOR/LIMITER
From preset mode, press the comp/limiter button to move to either the Compressor or Limiter module(s). Successive presses of COMP/LIMITER button will will toggle between the
Compressor and Limiter modules. Navigate through the Pages of the Compressor module by pressing the
"Next Page" or "Prev Page" buttons successively until you arrive at the desired Page.
Successive presses of the Data wheel will select
effect parameters within the currently selected page.
COMP/LIMITER
3.6 Navigating the EQ Section
The EQ button
toggles through
the EQs used in
each channel of
the selected
preset menu.
PEQ
GEQ
or
Navigating the "EQ Section"
To edit the parameters of the EQs used in a selected preset, simply use the following procedure. From preset mode,
press the EQ button to reach the EQ module to be edited. Successive presses of the EQ button toggle between the GEQ and the PEQ.
Navigate through the Pages of the selected EQ section by depressing "Next Page" or "Prev Page" successively until arriving at the desired Page.
GEQ On/Off
Flatten/Restore
EQ
Frequency
Gain -12dB to12dB
PEQ On/Off
Flatten/Restore
Bell,HSelf, LShelf, LHShelf,
Band 1 Freq
Gain -12dB to12dB
Q .20 to 16.0
Band 2 Freq
Gain -12dB to12dB
Q .20 to 16.0
Band 3 Freq
Gain -12dB to12dB
Q .20 to 16.0
Successive presses of the Data wheel will select
parameters within the currently selected page.
GEQ/PEQ
DriveRack
®
PX
Section 3
Editing Functions
17
®