User manual

Application Guide
®
32
Section 6
IEM
®
IEM User Manual
Hardware
1. Connect the stereo mix output 1 and 2 from the mixer to Inputs 1 and 2 of the IEM
2. Connect Outputs 1 and 2 from the IEM to inputs 1 and 2 of the Wireless Transmitter.
Software
1. Once signal is passing through the unit, adjust levels on the front panel of the IEM.
2. Make adjustments to each individual effect by pressing each respective effect button, and
then proceed to make parameters adjustments accordingly.
6.1 Mixer to IEM
Out-
Stereo Mix
Output - 1
In
IEM
Input -Ch 1
Out-
Stereo Mix
Output - 2
In
IEM
Input - Ch 2
Out-
IEM
Ch - Ch1
Out-
IEM
Ch - 2
In
In-Ear Trans.
Input -Ch 1
In
In-Ear Trans.
Input -Ch 2