Owner's Manual

59
®
Technical Information
Firmware Updates
The USB or Ethernet connector on the back panel of the PA2 can be used to perform firmware updates. Connect the USB
port to a Windows
®
PC for performing firmware updates using the PA2 Firmware Update Utility application. The latest PA2
Firmware Update Utility application will be made available on the DriveRack PA2 product page at www.dbxpro.com as updates
become available. If using the DriveRack PA2 control app , you can also update the PA2 via the Ethernet port straight from
the application, regardless of the device you’re using for control (i.e., iOS
®
, Android
®
, Mac
®
, or Windows
®
device). Follow the
included instructions provided with each application to perform the update procedure.