Brochure

SOURCE CONFIGURATION
Names are given to the physical audio inputs.
Stereo checkboxes allow adjacent inputs to be
configured as a stereo pair. Insert processing
is selected for each of the two Input DSP
Insert positions (see table for available
inserts).
ZONE CONFIGURATION
Names are given to the physical audio
outputs. Route/Mix radio button selec-
tions determine whether inputs are to be
routed or mixed to each output. A Crossover
Configuration dropdown list allows various
different crossover configurations to be selected. Insert processing is
selected for the Output DSP Insert position (see table for available
inserts).
ZC PANEL CONFIGURATION
Up to 12 Zone Controllers can be assigned,
named and configured. A Page checkbox allows
the function of ZC-3 and ZC-4 controllers to be
changed from the default Source Control to Page
Steer Control. Volume range limiting, source
configuration and page steering are configured as appropriate for each
Zone Controller.
SOURCE ZC ASSOCIATION
Volume control Zone Controllers can be config-
ured to control the volumes of audio inputs.
A single Zone Controller can be configured to
control multiple inputs.
ROUTING AND ZONE
ZC ASSOCIATION
Discrete sources or source selection Zone
Controllers can be selected as a Source. If a
Zone Controller is selected then the Source
will follow the Zone Controller in accordance
with the previous source assignment. An
input can be nominated, per output zone, as a
Priority – this input will override the Source when present. An input can
be nominated, per output zone, as a Priority – this input will override any
nominated Priority input and Source. Volume control Zone Controllers can
be configured to control the volumes of output zones.
FRONT PANEL CONFIGURA-
TION
Checkboxes and sliders allow, or restrict,
access to ZonePRO parameters from the front
panel of the device. Page steering presets,
which can later be accessed from the front
panel, can also be configured.
Z onePRO DESIGNER
ZonePRO Designer represents a quick and easy way to configure ZonePRO
devices for a large range of multi-zone applications.
dbx Professional Products
8760 South Sandy Parkway
Sandy, Utah 84070
801.566.8800
PN: 18-0546-A
Configure multi-zone applications quickly
and easily with ZonePRO
™
Designer
Input DSP Insert 1 Input DSP Insert 2 Output DSP Insert
None
Notch Filter
Compressor
Automatic Gain Control (AGC)
Gate
De-Esser
Advanced Feedback Suppression (AFS
™
)
Limiter
Input DSP
Insert 1
Input DSP
Insert 2
Output DSP
Insert
None
Notch Filter
Compressor
Automatic Gain Control (AGC)
Gate
De-Esser
Advanced Feedback Suppression (AFS
™
)
Limiter
SOURCE CONFIGURATION
Names are given to the physical audio
inputs. Stereo checkboxes allow adjacent
inputs to be configured as a stereo pair.
Insert processing is selected for each of
the two Input DSP Insert positions (see
table for available inserts).
ZONE CONFIGURATION
Names are given to the physical audio
outputs. Route/Mix button selections
determine whether inputs are to be routed
or mixed to each output. A Crossover
Configuration dropdown list allows various
crossover configurations to be selected.
Insert processing is selected for the Output DSP Insert position (see
table for available inserts).
ZC PANEL CONFIGURATION
Up to 12 Zone Controllers can be assigned,
named and configured. A Page checkbox
allows the function of ZC-3 and ZC-4
controllers to be changed from the default
Source Control to Page Steer Control. Volume
range limiting, source configuration and
page steering are configured as appropriate for each Zone Controller.
SOURCE ZC ASSOCIATION
Volume control Zone Controllers can be
configured to control the volumes of
audio inputs. A single Zone Controller can
be configured to control multiple inputs.
ROUTING AND ZONE
ZC ASSOCIATION
Discrete sources or source selection Zone
Controllers can be selected as a Source.
If a Zone Controller is selected then the
Source will follow the Zone Controller in
accordance with the previous source
assignment. An input can be nominated, per output zone, as a Priority
– this input will override the Source when present. An input can also
be nominated, per output zone, as a Page – this input will override
any nominated Priority input and Source. Volume control Zone
Controllers can be configured to control the volumes of output zones.
FRONT PANEL
CONFIGURATION
Checkboxes and sliders allow, or restrict,
access to ZonePRO parameters from the
front panel of the device. Page steering
presets, which can later be accessed from
the front panel, can also be configured.
Z onePRO DESIGNER
ZonePRO Designer represents a quick and easy way to configure
ZonePRO devices for a large range of multi-zone applications,
including digital zone processing for retail environments, restaurants,
bars, health clubs and nightclubs.
CONFIGURATION WIZARD
The Configuration Wizard within ZonePRO Designer guides users
through the step-by-step configuration process.
AutoWarmth
®
, a psychoacoustic function that maintains full frequency bandwidth even
when the signal level has dropped, is permanently available on each output zone.