User manual

Page16 DCLCD DCL24
Rear View Connections
The following descriptions are from left to right.
POWER – This plug is responsible for providing power to the monitor.
DVI – DVI stands for Digital Video Interface. This connection is for computers to
send video signals to the monitor digitally so that colors and video are more
accurate and vivid. This port supports video input; the DVI connection
support HDCP. If you have a HDCP or HDMI video device, you can use a
conversion cable to connect to this port. The following video resolutions
are supported; 480i, 480p, 720p, 1080i, and 1080p.
VGA – VGA stands for Video Graphics Array. This connection is for computers to
send video signals to the monitor by an analog signal. This method of connection
is the most commonly used connection. This port supports video through a
VGA to YPbPr video conversion cable. The following video resolutions are
supported; 480i, 480p, 720p, 1080i, and 1080p.