User Manual

ManualsBrandsDCM/Racemasters ManualsCars & Trucks1/24 RC Caterpillar Excavator

OPERATING INSTRUCTIONS

For Transmitter (Fig. 3 and Fig. 4)

1. Unscrew the screw on the battery cover

2. Open the battery cover

3. Install 2 new 1.5V “AAA” batteries with correct polarities (+/-)

as shown inside the battery compartment

4. Close the battery cover

5. Tighten the screw on the battery cover

For Vehicle (Fig. 1 and Fig. 2)

1. Switch OFF the power

2. Unscrew the screw on the battery cover

3. Open the battery cover

4. Install 5 new 1.5V AA batteries with correct polarities (+/-) as

shown inside the battery compartment

5. Close the battery cover

6. Tighten the screw on the battery cover

Battery Precaution

1. Alkaline batteries are recommended to be used

2. Only batteries of the same or equivalent type as recommended are to be used

3. Do not mix alkaline, standard or rechargeable batteries

4. Do not mix old and new batteries or different type of batteries

5. Non-rechargeable batteries are not to be charged

6. Rechargeable batteries for adult charging only

7. Rechargeable batteries are to be removed from the product before they are charged

8. Be sure to insert batteries with correct polarities and always follow the battery

manufacturer’s instructions

9. Remove all batteries from the Vehicle and Transmitter when not in use

10. Exhausted batteries are to be removed from the product

11. The supply terminals are not to be short-circuited

12. Dispose of batteries properly. Do not dispose the batteries in fire – it may cause

them to explode or leak causing injury or damage

13. Battery installation and removal must only be done by adult

-RC Vehicle (Vehicle) x 1

-RC Transmitter (Transmitter) x 1

-Instruction Manual x 1

2 x AAA

For Transmitter

(Not Included)

5 x AA

For Vehicle

(Not Included)

1. Turn on the Vehicle.

2. Install batteries in the Transmitter then the Transmitter signal light will flash for a few seconds.

3. After the wheels of the Vehicle turn left and right and the LED light of the Transmitter stops flashing, the binding process completed for playing.

4. If it cannot complete within 8 seconds, please turn off the Vehicle and re-start the binding process.

5. When the binding process is done, whenever switching the Vehicle on and off, it searches for the code that it memorized and will only lock on to the

Transmitter signal containing that code.

6. Please turn off the Vehicle and re-start all binding process if changing to another 2.4GHz Transmitter for playing.

7. Do not process the 2.4GHz frequency signal pairing for the vehicle and transmitter near the other 2.4GHz remote controlled products as it will cause the

interference or lose control of the vehicle.

1:24RC

336 Hydraulic Excavator

CONTROL RANGE 25M/82ft

Contents

RC Vehicle (Vehicle) x 1RC Transmitter (Transmitter) x 1

25M

RANGE

Battery Installation

Fig.

Vehicle

POWER

Fig.

Vehicle - Battery Installation Transmitter - Battery Installation

Fig.

Transmitter

Antenna

Forward/

Backward

Bucket Up

Button

Bucket Down

Button

Left/

Right

Fig.

How to Bind

25005

FREQUENCY

2.4 GHz

ACTIVE MOVEMENT

FULL FUNCTION

CONSTRUCTION RC

MULTI - PLAYERS

AUTHENTIC

SCALE MODEL

Battery

Cover

POWER

Summary of content (2 pages)

PAGE 1
25005 1:24RC 336 Hydraulic Excavator OPERATING INSTRUCTIONS FREQUENCY 2.4 GHz FULL FUNCTION CONSTRUCTION RC ACTIVE MOVEMENT AUTHENTIC SCALE MODEL MULTI - PLAYERS CONTROL RANGE 25M/82ft Contents 2 x AAA For Transmitter (Not Included) -RC Vehicle (Vehicle) x 1 25M -RC Transmitter (Transmitter) x 1 -Instruction Manual x 1 5 x AA For Vehicle (Not Included) RANGE RC Transmitter (Transmitter) x 1 Battery Precaution 1. Alkaline batteries are recommended to be used 2.
PAGE 2
5005 How To Play Vehicle Turn Left Turn Right Forward Stop Backward OFF / ON 1. Switch ON the Vehicle 2. Use the Left / Right joystick to control the Vehicle turning left or right Bucket Move Up 4. Press the Bucket move up Bucket Move Down 3. Use the Forward / Backward joystick to drive the Vehicle Forward, Stop and Backward 6. If the Vehicle does not run in straight line, adjust the direction adjustment on the Vehicle chassis (Fig. 1). 7. Play on smooth surface for optimum performance. 8.