User guide

P5040 DS Hardware Getting Started, Rev. 1.5
Freescale Semiconductor 29
Connector Default Settings
7 Connector Default Settings
Table 6 lists factory default connector settings for P5040 DS (SuperHYDRA). Figure 5 notes connector
locations.
Table 6. P5040 DS (SuperHYDRA) Connector Default Settings
Connector Name/Function Type Features Description
J1 USB2 OTG Micro-AB USB 9-pin [Default] OPEN
J2
•GETH1
• USB1 Host
•RJ-45
• USB Type-A
• RJ-45: 12-pin
• USB Type-A:
4-pin
[Default] OPEN
J3 SD/eMMC Card Slot Socket 19-pin
[Default] No inserted
SD/eMMC card
J5
Dual RS-232:
• UART1/3-Bottom
•UART2/4-Top
DB9 RS-232 Dual 9-pins
External RS-232 adapter
cable connection
J6 SLOT-1 Sideband Socket 2x20-pin For SGMII/XAUI riser card
J7 SLOT-2 Sideband Socket 2x20-pin For SGMII/XAUI riser card
J53 SLOT-3 Sideband Socket 2x20-pin For SGMII riser card
J8 SLOT-5 Sideband Socket 2x20-pin For SGMII riser card
J9 SLOT-6 Sideband Socket 2x20-pin For SGMII riser card
J10 SLOT-7 Sideband Socket 2x20-pin Reserved
J12 UART service Header 1x3-pin Not assembled
J13 SATA1 SATA 7-pin
External SATA cable
connection
J14 SATA2 SATA 7-pin
External SATA cable
connection
J16 I
2
C2 remote programmer Header 1x3-pin
External I
2
C2 remote
programmer connection
J19 External system clock source SMB COAX — [Default] OPEN
J20 PEX SLOT-1 PEX Socket 164-pin [Default] OPEN
J21 PEX SLOT-2 PEX Socket 164-pin [Default] OPEN
J22 PEX SLOT-3 PEX Socket 164-pin [Default] OPEN
J23 PEX SLOT-4 PEX Socket 164-pin [Default] OPEN
J24 PEX SLOT-5 PEX Socket 164-pin [Default] OPEN
J25 PEX SLOT-6 PEX Socket 164-pin [Default] OPEN
J26 PEX SLOT-7 PEX Socket 164-pin [Default] OPEN