Owners Manual

12
Side shelf assembly instructions (optional)
Note: side shelf model CAD1-SK can be installed with the head already on the cart.
Optional attach side shelf accessory on either side
INSTALLATION
1 Screw two shoulder bolts into the bottom
screws on the side of the cart. Tighten with
5/32 Allen wrench.
3 Holding the side shelf, install two shoulder
bolts into the slot and screw into the side
shelf tray. Tighten witha 3/16 Allen wrench.
2 Slide left and right side shelf brackets over
the shoulder bolt and install top screw
attaching the side shelf brackets onto the
cart. Tighten with Phillips screwdriver.
4 Place shelf in the up position and check for
level. If shelf is not level, adjust side shelf
set screw. Set screws can be adjusted using
a 3/32 Allen wrench. Turn the Allen wrench
clockwise to raise the shelf. Turn 1/4 turn
and review to see if the shelf is level. The set
screws in the left and right bracket should be
adjusted equally to ensure the shelf sits level.
Shoulder bolt
screw location
Shoulder bolt
screw location
Optional wood cutting board (model # CAD1-WCB, 70861) can
be purchased as an accessory from www.dcsappliances.com.