Owners Manual

14
Sink drain assembly instructions (optional)
INSTALLATION
IMPORTANT!
Remove all racks and drawers from the cart and grates. And remove burner caps and drip tray from the
side burner/sink prior to kit installation.
1 Attach tank bracket on the right side of the
cart.
3 Install the snap-lock clip in the back bottom
of the cart into the hole provided. Note the
direction of installation.
5 Install the tank/hose assembly in the cart,
over the tank bracket and feed the sink drain
hose through the hole in the center divider.
2 Install the snap bushing in the center divider.
4 Attach sink drain hose assembly to the tank
(include one tailpiece washer).
6 The drain hose at the bottom of the tank
exits the hole in the back of the cart. Attach
the 1/2” ball valve and fitting to the tank and
tighten the hose clamp.
WasherTank Sink drain hose assembly