Owners Manual

15
Sink drain assembly instructions (optional)
INSTALLATION
7 Set the side burner/sink securely on a table
and attach the faucet to the sink as shown.
a Remove the angle brackets from the side of
the unit and replace them with cart mount
brackets.
8 Feed the three-foot water supply hose/air
vent tube through the hole at the bottom of
the burner box, and attach it to the faucet.
b Install the bracket tab on both sides using
eight of the 10-24 x 1/2” screws. Install each
bracket with four screws on each side of
the grill head. For a CAD1-48/48E, use the
appropriately labeled bracket for your grill
head and cart side.
Rubber
Washer
Lock
Washer
Lock
Nut
IMPORTANT!
Finger tight first, then use a wrench.
IMPORTANT!
Excessive weight hazard. Use two or more people to move and install sink/burner assembly onto
the cart.
9 Outdoor appliance head preparation