Owners Manual

16
Sink drain assembly instructions (optional)
INSTALLATION
IMPORTANT!
Beware of pinch points and sharp edges to avoid injury to arms and hands.
a Remove drip tray/pan and other removable
components such as grates, top burner
caps and components, and griddle flue
cover, radiant tray and grill burner for easier
handling.
c Position tabs on side bracket to fit into slots
on the cart. When complete, the landing
ledge should sit flush on the top of the cart.
e Install remaining three screws (10-24 x 1/2”)
into the front of head to the cart.
b Place rear of head over the rear of the cart
first then allow the rear side tabs to first locate
in the slots on the top of the cart sides. The
other tabs will locate in the middle and front
slots as the head is lowered into position.
d Secure the head to rear of cart with Phillips-
head screws provided (10-24 x 1/2”).
!1 Feed the water supply hose through the
center divider hole, down to the bottom
opening of the cart.
!0 Head placement onto cart