Owners Manual

6
Eye Goggles
Work Gloves
5/32” Allen Wrench
3/16” Allen Wrench
Power Screwdriver or Variable
Speed Drill with Phillips - tip #2
Attachment
30” Cart shown
Machined Phillip
screws 10-24X1/2”
Bolt Hex
1/4-20-12”
Nut Hex
1/4-20
Washer
.313 x .750
Bracket, Tab
3/32” Allen Wrench
A
B
Top view (with
drawers open)
INSTALLATION
Cart assembly instructions
IMPORTANT!
y Some parts have sharp edges; care must be taken when handling
the various components to avoid injury. Please read safety
information provided in these instructions before beginning
assembly. Wear gloves when handling.
y Two or more people should work together to assemble the cart and
All-Grill, Double Side Burner/Sink, or Double Side Burner/Griddle.
y Avoid using side shelf to move cart. Push or pull the cart by
grasping corners of head.
Locating the cart
For proper use, this product should be installed/positioned
on a flat ground or patio. Unevenness such as bumps, cracks
and protrusions should be
¼
” or less. Refer to illustration
and the below table for required flat area dimensions.
Table of quantity of parts
Tools required
Content included
Your cart is packaged in one box. The box contains your cart and a universal hardware kit to be used
for grill installation and may contain extra hardware for your convenience.
REQUIRED FLAT AREA
CAD1-36/36E CAD1-48/48E
Inches (mm) Inches (mm)
A
Width
36 (914)
48 (1219)
B
Depth
48 (1219) 48 (1219)
CONTENTS MODEL PART NO. QTY.
CAD1-30 71131 1
CAD1-36 71132 1
CAD1-36E 71407 1
CAD1-48 71133 1
CAD1-48E 71408 1
CONTENTS
CAD1-
30
CAD1-36/36E CAD1-48/48E
13 16 17
22 4
22 2
44 4
22 2